Micromake Kossel Delta 3D Printer Kit

Micromake Kossel Delta Autoleveling 3D Printer Kit

Features:

• All injection molding non-standard parts
• Black oxidation aluminum profile
• High performance control board
• Double air duct effector
• High intensity extruder

Types:

• Pulley Type: Pulley version with power supply(12V,6A)+8G SD card+test pla+tool kit.  [out of stock, not available]
• Pulley Type + Heated Bed : Pulley version with power supply(12V,15A)+8G SD card+test pla+tool kit+Heatbed [out of stock, not available]
• Linear guide: Linear guide with power supply(12V,15A)+8G SD card+test pla+tool kit+Heatbed. The linear rail is produced by local place which add special flange to avoid the slide block drop down.

Lead Time : 4 to 5 Business Days

Technical Specifications:

It tooks us three months to design and open mode, finally the new auto-level effector comes out. We add dedicated cooling fan to fit our well-designed double duct so that the consumble can cool quickly after it is extruded. Meanwhile, it can avoid to drop down so the effect of hollow out, high-deviated print and long-distance bridge is better. And it will need no long time to wait the previous part to cool down at the condition of high speed. With the same effect, you can use faster speed to print. We upgrade auto-level system, add spring to assist the springback, with the high precision injection molding, the accuracy of the probe improved significantly.

We redesign wire feeder completely. Aimed at the aging and deformation of the fixture of wire feeder, we use screws to fix bearing in both sides to reach the same intensity as the metal extruder and never distortion. And in order to adjust the fixture, we upgrade to butterfly nut freely.

All the parameter setting will come into effect after click save, no need to change the firmware source code or update again. Non-tradition differential compensation but new exclusive independence R&D auto-level system. The real auto-level system that you even no need to assemble the screw used to manual leveling. The most detailed assemble video course, we teach you hand in hand. You can watch the software and video course in our official website or online.

Improve the coloring process of aluminium profile, slicing and cleaning first then oxidation to solve the aluminium skimming problems thoroughly. And the kerf parts all black oxidation so that the appearance is more beautiful. The linear guide is special designed by the manufactures with the particular flange to avoid the slider drop down. The black screw hole is special handling with the full bead and steel ball hold structure.

All the non-standard parts now upgrade to injection molding without any printed pieces. We import korean LG new ABS alloy materials with high intensity and high toughness. The injection molding non-standard parts can promise the same size as the original parts. It avoid the error of the print, improve the stability and precision of the whole production and easy to assemble.

Makeboard Mini is specially designed by Micromake Technical Team to solve the problem which usually occurs on the open source control board of Ramps 1.4 3d printers. It’s suitable for 3D printer DIY kits manufacturer in particularly. The more kits you purchase, the cheaper. Please discuss with customer service on Trade Manager. We take stablity, heat dissipation and concision into account and the effect has verified by Micromake 3d printers, we had sell almost two years and thousands of our products, there are few errors about the control board. We had fully consider about the mistakes that customers usually make in the beginning, so we use different color to distinguish different connector, and use XH connector to avoid reverses. We give enough protection in the circuit program. The board adopt dual self-recovery fuses to avoid short-circuit and 4-way high resistance diode to avoid reverse so you will not damage the board even if the wire of power sully is insert oppositely.

The installation kits such as the motor, fan and the limit endstop are all largely customized by our factory, so we can finish the ordered-length and connector, not to link the extension cord in the later period. The head of the printer has changed many times according to the practical usage in recent one year, now it has solved the problems of stop up and weeping thoroughly.

With best quality pearl wool, promise you receive the product safe and fast. All the components are packaged in different hole with the lables in the sales list to easy your assemble. The screws are also sealed in different bags with different labels, so don’t worry any mistake！