Makemendel | RapidBot 3.0 With 1Kg Free PLA

Quick Overview

RapidBot 3.0- Desktop 3D Printer with build size of 22 x 22 x 16.5cm.

Technical Specification :

• Machine size: 450 x 350 x 370mm
• Build size: 220 x 220 x 165mm
• Nozzle Diameter : 0.4 mm
• Layer Thickness : 0.1 mm
• Speed : 60 mm/s
• Positioning Precision : 27 microns
• Input Format : STL
• Technology : FFF (Fused Filament Fabrication)
• Software : Pronterface (Open Source)
• System Copatibility : Windows, Linux, MAC.
• Power Supply : ATX, 450W
• Weight : 12 KG

Features of RapidBot 3.0 3D Printer:

• 0.4 Nozzle diameter allows100 micron layer height.
• Printing speed : 60mm/s.
• Inut formats : STL, GCode
• Print with SD card, Computer is no more required.
• LCD Controller Support
• It uses high quality linear motion guide.
• PrintrBoard and Power Supply are placed at the bottom to give clean and neat look.
• Mechanically more Stable Compact design.
• Improved PrintBed Adjustment.
• Improved Extruder Design and Z axis.
• Accurate and easy belt placement.
• Large build volume with easy accesibility.
• Uses high quality acrylic from: www.perspex.co.uk
• Integrated Power supply for both PrintrBoard and HeatBed.
• Uses high quality GT2 belts and pulley(Aluminium) , to give high accuracy.
• Self locking design ensures rigid frame.
• Extruder is designed for easy filament changing.

Watch more videos here: http://www.youtube.com/results?search_query=makemendel

This complete RapidBot 3.0 3D Printer contains :

This kit contains everything required for running 3D printer. You need not to buy anything else.

• PrintrBoard Electronics – with presoldered endstops with molex connectors and high temperature heat cables for connecting Heater and Thermistor
• All hardware, bearings, bolts, nuts, washers, Linear motion guide, Flange Bearings, Flange nut etc
• All acrylic sheets (Side plates, Bottom plate, Top plate, Middle plate, Y frog support, Extruder base, Extruder motor plate, Heated printbed)
• M8 Threaded rods (255mm)
• Chrome plated Smooth rods (292mm)
• 5 Stepper Motors – with presoldered Molex connectors
• M4 Brass insert piece - for direct drive on motor shaft (5mm inner diameter)
• Pre-assembled J-Hotend, including G550 Thermistor, Heat Resistor, Cooling fan, etc
• Kapton tape 15mm (Insulation of Thermistor legs)
• Kapton tape 40mm (To print on)
• Set of 4 Heater blocks, 4 x 1.0 Ohm (for Heated printbed)
• Cooling paste (To use between Printbed and Heater blocks)
• PTFE strain-relief
• GT2 belts and pulleys
• USB and Power supply cables
• 2GB Micro SD card
• Extras such as Endstops, Magnetic leveler, Forceps, Few meter of PLA, Plastic tie etc.

Lead Time: 2 to 3 Days.