Geeetech Me Creator 3D Printer V 2.0 - Free Shipping

Share and you can get discount
$5 USDfor share
Seller: Geeetech
Product Code: 166/
Availability: Out Of Stock

Price: $499 USD $438 USD
Have you seen cheaper?
Have you seen cheaper? Tell us and get it more cheaper.
This limited offer ends in:
Hurry! Only 0 left!
789 purchased

Order 2 or more units for $430 USD
Order 5 or more units for $425 USD
Order 10 or more units for $420 USD
Order 20 or more units for $415 USD

Available Options

* Power Voltage:


Estimate Shipping:

Region / State:
Post Code:
Payment Methods:
42 reviews   Rating: 4/5.
Based on 42 reviews   |  Write a review

Geeetech MeCreator 2 - Fully Assembled Desktop 3D Printer

MeCreator 2 is our new desktop 3D printer with half-opened and box-type design and 160x160x160mm building volume. It is optimized and improved based on the previous MeCreator, bringing MeCreator 2 with more exciting features.

The control board and power supply unit are hidden in the bottom of the printer, compact and space efficient, providing stable support for printing as well as protection for you. The upgraded hardware and optimized firmware bring you excellent printing effect.

The printing precision is up to 0.05mm, and the positioning precision is up to 0.05mm for X/Y axis and 0.02mm for Z axis. Regarding to the printing material, MeCreator 2 supports various filaments including ABS, PLA, flexible PLA and wood-polymer. In addition, MeCreator 2 is equipped with LCD2004 controller, which enables stand-alone printing with SD card.

Like MeCreator, MeCreator 2 will be delivered after assembly as well, which  saves you from the trouble of assembling. Get a MeCreator 2 now, and welcome to the wonderful world of 3D printing!

Lead Time: 4 Business days.


  1. Safe, stable and space-efficient

High-quality steel chasis makes the printer firm and durable, as well as attractive in appearance. The main board and power supply unit are installed in the bottom of the printer, safe and space efficient. And this structure lowers the gravity center of the printer, providing stable support for printing. The half-opened design of the printer provides you with enough protection, as well as various perspectives to observe the printing process.

  1. High-performance control board

The control board is our self-developed GT2560B 3D printer control board which is powered by ATmega2560. With its 256KB Flash Memory and 16MHz operating frequency, GT2560B provides endless power for MeCreator 2 to achieve high-performance printing effect.

  1. Excellent MK8 extruder

 MeCreator 2 comes with upgraded MK8 extruder whose feeding device uses double “V” design which can ensure stable and constant feeding. The heat-resisting PTFE tube inside the barrel ensures fluent feeding and helps avoid blocking problem thanks to its self-lubricity. The precise brass nozzle ensures accurate extrusion, realizing excellent printing effect.

  1. Higher transmission accuracy of Z-axis

Z-axis adopts high-precision lead screw which is able to convert rotary motion to linear motion. The lead screw features high accuracy, reversibility and high efficiency. It can achieve accurate micro-feeding to ensure printing precision, and high-speed feeding to ensure fast printing speed.

  1. Better adherence with heat bed

The printing platform is made up of high-quality aluminum alloy plate and superior heat bed, which can be heated up to 110℃, ensuring better adherence of filament, preventing the first layer from warping, providing better printing quality.

  1. Various filaments supported

The upgraded hardware and optimized firmware allowzhex MeCreator 2 to support various filaments including ABS, PLA, flexible PLA and wood-polymer filament. Giving you a wide range of choices for your different printing needs.

  1. Larger printing volume

Compared with the 150x150x125mm printing volume of Mecreator, the building area of Mecreator 2 is increased to 160x160x160mm. You can print more kinds of models of larger volume. 

  1. Supporting various 3D printer software

MeCreator 2 supports most kinds of popular 3D printer control software including Repetier Host, Printrun and 3D Simplify, and it supports slicing software like Cura and Slic3r, whose intuitive UI design and simple operation bring you good user experience. You can easily use the printer well even you are a starter.

  1. Supporting stand-alone printing with SD card

MeCreator 2 adopts LCD2004 controller, on which the detailed printing status are clearly presented on the screen. In addition, there is an SD card slot for LCD, with an SD card, MeCreator 2 can easily realize stand-alone printing. This allows you to print without connecting your MeCreator 2 to computer and helps you avoid possible printing interruption problem caused by the breakdown of computer system.

  1. Built-in LED light

Inside the printer there is a LED strip, which gives out blue light, bringing you a clear view of the model being printed even under insufficient lighting. What’ more exciting, you can control the LED light intensity by sending different code commands to satisfy your different needs.

  1. A wide range of application

3D printing technology can be applied to a wide range of fields including industrial manufacturing, designing, machine part manufacturing, modeling, building, arts and culture field, teaching, archaeology, toys producing and so on. Unleash your creativity and 3D printing will bring you endless surprises.

  1. Save you from trouble of assembly

MeCreator 2 is assembled and tested by us before shipping. You can start printing right out of the box. Compared with DIY 3D printer, MeCreator 2 saves you from troubles of assembling. MeCreator 2 is highly recommended to both starters and experienced users.


Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2
Geeetech Me Creator 2



Notes on security:

  • Never reach inside your Me Creator printer when it is working. Moving parts can cut or pinch you, and several parts reach high temperatures that can cause burns and other injuries.
  • Always allow your Me Creator printer to cool down for at least 15 minutes before you touch any internal part or remove the printed object.
  • Never leave your Me Creator printer unattended while printing or powered on.
  • Always turn off your Me Creator printer and disconnect it from your computer when not in use.
  • Never try to print using any materials that have not been approved by Me Creator.
  • Keep the nozzle tip at least two inches away from the heated build platform anytime you are not running a print job.
  • Never operate your Me Creator printer if it appears damaged.
  • In case of an emergency or malfunction, immediately disconnect your Me Creator printer from the power outlet and computer.

*Free Shipping only for the following counties: American Samoa, Austria, Bahrain, Belgium, Bermuda, Brunei, Darussalam, Bulgaria, Cambodia, Canada, Cook Islands, China, Canary Islands, Cyprus, Czech Republic, Denmark, Estonia, Fiji, Finland, France, Polynesia, Gibraltar, Greece, Greenland, Guam, Guernsey, Germany, Hong Kong, Hungary, Iceland, Iraq, Ireland, Israel, India, Indonesia, Italy, Japan, Jordan, Kiribati, Kuwait, Laos, Latvia, Lebanon, Lithuania, Luxembourg, Macau, Malaysia, Malta, Marshall Islands, Mexico, Monaco, Micronesia, Nauru, Netherlands, New Caledonia, New Zealand, Niue, Norway, Oman, Palau, Papua New Guinea, Philippines, Poland, Portugal, Qatar, Romania, Saint Pierre and Miquelon, San Marino, Saudi Arabia, Singapore, Slovakia, Slovenia, Solomon Islands, Spain, Sweden, Switzerland, Taiwan, Thailand, Tonga, Turkey, Tuvalu,United Arab Emirates, United Kingdom, United States, Vanuatu, Vietnam, Wallis and Futuna, Western Samoa, Australia, Yemen.

Affordable shipping price for other countries.

Technical Specifications
Print size ( X Y Z ) 160 x 160 x 160 mm
The Layer Thickness 0.1 mm
Layer Resolution 50 microns
Chassis powder-coated steel
Filament Compatibility ABS/PLA/flexible PLA/wood-polymer
Filament Diameter 1.75 mm
Nozzle Diameter 0.3 mm
Print Speed 60 to 80 mm/sec
Print Plate (Build Platform) MK2A Heatbed
AC Input 110V/220V 360W, DC12V/29A
Extruder Type MK8
No.of Extruders One
Print Head/Hotend/Nozzle Type MK8
Connectivity (Interface) USB, SD Card
Electronics GT2560
3D printing Software Repetier Host, Printrun, Cura
CAD Input data file format supported .STL, G code
Client Operating System Windows, Linux, Mac
Print in dual color NO
Print in multi color NO
Machine Dimensions 320x320x360 mm
Shipping box dimensions 460x460x410mm
Machine weight 9.05kg
Shipping box weight 10
Lead time 4 Business Days
Shipping Location China
Manufacturer Warranty 1 year
| 42 reviews
I am very impressed with the sturdy steel construction of Geeetech Me Creator 3D Printer. It was delivered before the expected time and when I finally opened it and started assembling it I figured out that it is a strong and durable machine. It is light in weight and I carry it easily from home to office and then back to home. My son has also started using the printer for his office projects and I am planning to one to him.
| 42 reviews
This is my first 3D printer and I am happy with it. Even my wife likes it and uses it at times just for fun. It is very easy to use and it took me just a day to assemble and explore the machine. From the second day, I started printing. The printing quality is good and the speed is also impressive. The only issue which I face is that I am not able to print properly on ABS as in the results are not precise and definitely not what I expect. But it works great on other filament.
| 42 reviews
To be honest, I am not happy with how the printer and its functionality. It is a poor quality printer and definitely not among the good ones which I already own. The parts which came along to assemble the printer are of poor quality and I don’t think that this printer is even going to last for 1year. The printer worked fine for 2 days but after that its nozzle got blocked and I started having other issues too. I think all this happening due to its poor quality.
| 42 reviews
The printer is an excellent machine which is full of modern features. When I read the specification of the printer online I was shocked to see such an updated printer at such reasonable price. I ordered it immediately and I am still in shock because it works so well. The printer is a fully assembled machine which saved a lot of time. This is the best printer I have ever come across. Its accurate offers fast printing speed which is unbeatable. It offers large printing areas which allow me to print larger objects with same accuracy.
| 42 reviews
I wanted a printer which can offer me precise printouts for my new project as the client is really demanding and this printer impressed me with its excellent quality and precise printing. Initially I faced difficulties while understanding how the printer works and I took my colleagues help too but after that I never faced a single issue. The best thing is that the printer supports various open-source 3D printer software which are very easy to install and offers so many features. The print outs are of high resolution and exact too. Recommended!

Write a review

Your Name:

Your Review: Note: HTML Supported!

Rating: Bad           Good

Related Products /10/

Mbot Mini Desktop 3d printer
4 reviews (4 reviews)
$565 USD
Afinibot Creality Portable 3D Printer - Free Shipping
54 reviews (54 reviews)
$300 USD $265 USD
This limited offer ends in:
Afinibot Creality Pro Laser Engraving 3D Printer
25 reviews (25 reviews)
$699 USD $520 USD
This limited offer ends in:
Afinia H480 Mini 3D Printer
9 reviews (9 reviews)
$1,299 USD
Max Micron Foldbot - Folding type 3D Printer DIY KIT
32 reviews (32 reviews)
$399 USD $269 USD
This limited offer ends in:
Createbot Super Mini - Light Weight Metal Frame 3D Printer
13 reviews (13 reviews)
$399 USD $259 USD
This limited offer ends in:
Afinibot A30 Portable 3D Printer DIY Kit
29 reviews (29 reviews)
$300 USD $255 USD
This limited offer ends in:

3d printing latest news

View All News
3D Printed Aquaponic Home Date posted - 26/10/2016

3D Printed Aquaponic Home

The uncontrolled increase in population, continuous rise in tempe...

Read More
3D Portable Smartphone La Date posted - 25/10/2016

3D Portable Smartphone La

The world is witnessing the technical revolution each day with th...

Read More
Researchers Explore 3D Pr Date posted - 24/10/2016

Researchers Explore 3D Pr

The use of 3D printing technology is advancing day by day. The te...

Read More
Reebok to Bring 3D Printe Date posted - 22/10/2016

Reebok to Bring 3D Printe

Reebok has created a remarkable history in the world of the shoe ...

Read More

Last viewed

Geeetech Me Creator 3D Printer V 2.0 - Free Shipping
42 reviews (42 reviews)
$499 USD $438 USD
This limited offer ends in:
3D Printers Online Store © 2013-2016 All Rights Reserved.