There may be shipping delays for certain products due to COVID-19. Stay Safe!
The Folger Technologies Cloner is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine With the use of a few simple tools and a little bit of time you too can get started 3D printing the worlds next big idea.
This kit is a remake of a common open source design that has been improved and made more DIY/Maker friendly using the RAMPS controller with Marlin, and the 2004 LCD with SD card for standalone printing with our the PC.
Benefit of LCD Controller:
2004 LCD Controller w/ SD Card Reader (Print Without a Computer!)
LCD screen with adapter for RAMPS 1.4 controller board. Includes SD card reader, buzzer, stop button, and turnable knob that also acts as a button.
FREE SHIPPING To USA.
Lead Time: 2 to 4 Business days.
** As we receive customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you receive might reflect some of these slight changes and improvements.
** Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records. Link also contains .stl files to print replacement plastics.
Affordable shipping cost: $0 USD to USA and $60 USD to other countries.
This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.
Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.
However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.
Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.
High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.
We wouldn't recommend leaving your printer running un attended, or at least until you are confident to do so. We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.
|Manufacturer Warranty||30 days|
|Print size ( X Y Z )||230 x 150 x 120 mm|
|Print Speed||60 to 160 mm/sec|
|Layer Resolution||50 microns|
|Print Precision (Layer Thickness)||.05 mm|
|Filament Diameter||1.75 mm|
|Nozzle Diameter||0.4 mm|
|Filament Compatibility||ABS, PLA, Wood, HIPS, PETG and PVA|
|Print in dual color||Yes|
|Chassis||Oak or Melamine|
|Print Plate (Build Platform)||HeatBed|
|Print Head/Hotend/Nozzle Type||Brass Nozzle|
|Stepper Motors||NEMA 17|
|3D Printing Software||Cura, Repetier Host|
|Supported File Formats||STL|
|Heating Bed Temperature||110°C|
|AC Input||110 / 220 V|
|Power Requirements||360 W 12 V 30A|
|Connectivity (Interface)||USB, SD Card|
|Electronics (Motherboard)||RAMPS 1.4|
|Machine weight||9 Kg|
|Shipping box weight||10.5 Kg|
|Machine Dimensions||457.2 x 457.2 x 406.4 mm|
|Shipping box dimensions||508 x 508 x 203.2 mm|
|Shipping Location||New Hampshire USA|
|Lead Time (Processing/Handling Time)||2 Business Days|