Folger Tech Cloner - Dual Extruder 3D Printer Kit

Share and you can get discount
$5 USDfor share
Seller: FolgerTech
Product Code: 271/
Availability: In Stock

Price: $799 USD $360 USD
Have you seen cheaper?
Have you seen cheaper? Tell us and get it more cheaper.
This limited offer ends in:
Hurry! Only 10 left!
357 purchased

Order 2 or more units for $360 USD
Order 5 or more units for $355 USD
Order 10 or more units for $350 USD
Order 20 or more units for $345 USD

Available Options

* Choose Frame:

* Choose Extruder :

Estimate Shipping:

Region / State:
Post Code:
Payment Methods:
41 reviews   Rating: 4/5.
Based on 41 reviews   |  Write a review

Folger Tech Cloner 3D Printer Kit - Assembly required

The Folger Technologies Cloner is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine With the use of a few simple tools and a little bit of time you too can get started 3D printing the worlds next big idea.

This kit is a remake of a common open source design that has been improved and made more DIY/Maker friendly using the RAMPS controller with Marlin, and the 2004 LCD with SD card for standalone printing with our the PC.

Benefit of LCD Controller:

2004 LCD Controller w/ SD Card Reader (Print Without a Computer!)


Lead Time: 2 -5 Business days. 

Folger Tech Cloner 3D Printer Kit

** As we receive customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you receive might reflect some of these slight changes and improvements.

Highlighted features:

  • Impressive 230mmx150mmx120mm Build Area.
  • Able to print ABS, PLA, Wood, HIPS, PETG and PVA (1.75mm).
  • Layer Resolution of 50 microns.
  • Print Speed of 60 to 160 mm/sec
  • Supports SD card for offline printing. Print without PC.
  • Oak or Melamine Chassis.
  • Can run 110V or 220V (Only Comes With US Cord).
  • Packed And Shipped from the USA.

This kit includes the following:

  • Complete Set of Black Injections Molded Parts.
  • 2004 LCD with SD card Reader.
  • Laser cut Frame (Melamine or Oak) [Made in the USA].
  • x8 LM8SUU Linear Bearings.
  • x2 SC8LUU Bearings (Bed).
  • x4 MP105 bearings.
  • x1 Idler Pulley.
  • 8mm Chromed Linear Rod for X, Y, Z (Pre-Cut).
  • T8 Lead Screw 2mm pitch.
  • x1 230mmx150mm Bed.
  • x1 Direct Drive Extruder w/ Injection Molded Parts for 1.75mm ABS/PLA/Wood/HIPS/PETG/PVA (Available in Dual or Single Extruders).
  • 360W 12v 30A Power Supply.
  • x4 NEMA 17 2.6kg/cm Stepper Motors.
  • x1 NEMA 17 4.8kg/cm Stepper Motor (Used for Bed).
  • x3 Meters of GT2 Belt.
  • x1 GT2-188 Belt.
  • x6 20 Tooth Pulleys.
  • x1 36 Tooth Pulleys.
  • x1 Ramps 1.4.
  • x1 Arduino Mega 2560 R3 Clone.
  • x5 A4988 Stepper Drivers.
  • x1 Roll of 8mm Kapton Tape.
  • x2 5mmx8mm Couplings.
  • x3 Electronic End Stop Circuits w/ LED.
  • x3 Belt Tensioners.
  • x4 Threaded Bed Adjustment Knobs.
  • x4 Bed Springs.
  • All Required Nuts/Bolts for Assembly.
  • Power Cable.

Items you will need:

  • Tools.
  • Filament.
  • Time.

Build Guide and Firmware/Software:

** Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records. Link also contains .stl files to print replacement plastics.

download user manual

Affordable shipping cost: $0 USD to USA and $60 USD to other countries.


This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.

Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.

However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.

Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.

High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.

We wouldn't recommend leaving your printer running un attended, or at least until you are confident to do so. We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.

Technical Specifications
Print size ( X Y Z ) 230 x 150 x 120 mm
The Layer Thickness .05 mm
Layer Resolution 50 microns
Chassis Oak or Melamine
Filament Compatibility ABS, PLA, Wood, HIPS, PETG and PVA
Filament Diameter 1.75 mm
Nozzle Diameter 0.4 mm
Print Speed 60 to 160 mm/sec
Print Plate (Build Platform) HeatBed
AC Input 110 / 220 V
Extruder Type MK9
No.of Extruders Two
Print Head/Hotend/Nozzle Type Brass Nozzle
Power Requirements 360 W
Connectivity (Interface) USB, SD Card
Electronics RAMPS 1.4
3D printing Software Cura, Repetier Host
CAD Input data file format supported STL
Client Operating System Windows/MAC/Linux
Print in dual color Yes
Machine Dimensions 457.2 x 457.2 x 406.4 mm
Shipping box dimensions 508 x 508 x 203.2 mm
Machine weight 9 Kg
Shipping box weight 10.5 Kg
Lead time 2 Business Days
Shipping Location New Hampshire USA
Manufacturer Warranty 30 days
| 41 reviews
Folger Cloner is the one of the best 3D printers that I have worked upon. The features of this printer are worth praising. I am amazed with it’s out of the box functioning. Printing in PLA is exceptional. Truly impressive! The prints are precise and resolution is mind-blowing. The good part is that it does not take a lot of time. I purchased the black melamine frame and can tell you with my experience that this one is sturdy and packed with all the great features that a good printer possesses. Kudos to their customer service as well! 5-stars for this super-package!
| 41 reviews
The printer is just worth the penny! It is such a great kit, the build-up is huge! I purchased this printer and absolutely love it. The best thing is this printer can print with dual extruders. No filament problems so far although I regularly adjust the z-axis for layering purpose. People who are the beginners in 3D world can go for raft.
| 41 reviews
I am a professional in 3D printing. The Folger Tech Cloner is value for money. I received this DIY kit in a secure packaging. Assembling it was not that difficult a task. However, it involved a little bit of tinkering. I have been using it to print PLA, and PVA. Its LCD screen works efficiently. My only concern is with the noise issue. But, at such a sticker price, the issue can be simply ignored. 3-stars for its performance so far!
| 41 reviews
Excellent quality printer at very reasonable prices! I love this printer and I work on it every day. It is very sturdy as it’s been 10 months with the printer and I have not faced a single issue. The printer works equally well every time I take a printout and never disappoints me. The 50-micron layer resolution of the printer offers high resolution prints looks outstanding. The open-source software is the best feature which makes the printer an advanced machine. recommended!
| 41 reviews
I ordered the printer for my son’s project and he is very happy with it. The best part about this printer is its good printing build area which allows him to print larger objects with ease. He told me that the larger objects are as precise as the smaller objects and there is no compromise in their quality. He enjoys printing on this printer but at times he feels that the printer gets bit slow and he is able to take little less than the expected print outs.

Write a review

Your Name:

Your Review: Note: HTML Supported!

Rating: Bad           Good

Related Products /7/

Max Micron - Aluminium Frame Dual Head & Auto Levelling 3D Printer
70 reviews (70 reviews)
$499 USD $369 USD
This limited offer ends in:
Flashforge - 2016 New Creator Pro FDM 3D Printer
47 reviews (47 reviews)
$1,199 USD $899 USD
This limited offer ends in:

3d printing latest news

View All News
3D Printed Aquaponic Home Date posted - 26/10/2016

3D Printed Aquaponic Home

The uncontrolled increase in population, continuous rise in tempe...

Read More
3D Portable Smartphone La Date posted - 25/10/2016

3D Portable Smartphone La

The world is witnessing the technical revolution each day with th...

Read More
Researchers Explore 3D Pr Date posted - 24/10/2016

Researchers Explore 3D Pr

The use of 3D printing technology is advancing day by day. The te...

Read More
Reebok to Bring 3D Printe Date posted - 22/10/2016

Reebok to Bring 3D Printe

Reebok has created a remarkable history in the world of the shoe ...

Read More

Last viewed

Folger Tech Cloner - Dual Extruder 3D Printer Kit
41 reviews (41 reviews)
$799 USD $360 USD
This limited offer ends in:
3D Printers Online Store © 2013-2016 All Rights Reserved.