Printrbot Simple 3D Printer

Share and you can get discount
$5 USDfor share
Seller: Printrbot
Product Code: 229/
Availability: In Stock

Price: $539 USD
Have you seen cheaper?
Have you seen cheaper? Tell us and get it more cheaper.

Order 2 or more units for $535 USD
Order 5 or more units for $530 USD
Order 10 or more units for $525 USD
Order 20 or more units for $520 USD

Available Options

* Choose Your Model:

Estimate Shipping:

Region / State:
Post Code:
Payment Methods:
41 reviews   Rating: 4/5.
Based on 41 reviews   |  Write a review

Printrbot Simple 3D Printer with Heated Bed

Printrbot’s first all-metal 3D Printer kit now available with a heated bed. The all metal construction combined with a GT2 belt pulley system produces a 3D print that rivals those of other manufacturers which cost thousands more!

Printrbot Simple 3D Printer


Lead Time: 1 Business day

Technical Specifications:

  • Model: 1403.
  • Build Volume: 6″ x 6″ x 6″ / 150mm x 150mm x 150mm / 216 cubic inches.
  • Print Resolution: 50 Microns.
  • Print Speed: 80mm/sec max recommended.
  • Filament: 1.75mm PLA (sample included).
  • Extruder: Alu Extruder (direct drive) with 1.75mm Ubis Hot End with 0.4mm nozzle.
  • Auto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height.
  • Print Bed:Not heated (0.3mm level tolerance).
  • Construction: Powder coated steel and aluminum body with 8mm and 12mm diameter linear shaft.
  • Belt: GT2.
  • Pulleys: 20 tooth, dual flange GT2 aluminum.
  • Electronics: Printrbot Rev F Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing.
  • Software:Printrbot does not provide software, but recommends Cura v15.04 – available for free download.
  • Power Requirements:12V (6 amp) laptop power supply (included).
  • Motors: NEMA 17 stepper.
  • Overall Footprint*: 18″ x 17″ x 13″ (L x W x H).

*Overall Footprint is the space needed to operate the full range of motion for the machine – X, Y, and Z axes travel.

Technical Specifications
Print size ( X Y Z ) 150 x 150 x 150 mm
The Layer Thickness 0.05 mm - 0.4 mm
Layer Resolution 50 microns
Chassis Powder coated steel and aluminum body
Filament Compatibility PLA
Filament Diameter 1.75mm
Nozzle Diameter 0.4 mm
Print Speed 30 to 80 mm/sec
Print Plate (Build Platform) Aluminium plate (Not heated)
Extruder Type Alu Extruder v2 (direct drive)
No.of Extruders One
Print Head/Hotend/Nozzle Type Ubis Hot End
Power Requirements 12V (6 amp) laptop power supply
Connectivity (Interface) USB
Electronics Printrbot Rev F Printrboard
3D printing Software Cura v15.04
CAD Input data file format supported STL, G-code
Client Operating System Windows, Linux, Mac
Machine Dimensions 457 x 431 x 330 mm
Shipping box dimensions 355 x 254 x 406 mm
Shipping box weight 8.5 kg
Lead time 1 Business day
Shipping Location USA
Manufacturer Warranty 30 days
| 41 reviews
<p>This printer is fantastic!</p> <p>I have two other 3d printers (Makerbot Replicator [$3000] and Lulzbot Mini [$1300]). This one, despite its low price performs far more consistently than the others. We set it up with Cura, which is arguable less user-friendly than the tools offered by the other printers. However, once you get over the learning curve (takes about an hour), this machine will print anything you can throw at it!</p> <p>The only downsides are the lack of a spool holder (which you can print out for yourself) and no on-unit interface (you have to have a computer connected at all times. I bought this for work, but am seriously considering getting one for home as well.</p>
| 41 reviews
I cant express how impressed i am with this printer. I bought it last summer and in the time between then and now it cas come into its own with a little tuning and upgrading. i can proudly say that it prints just as well as 1-2 thousand dollar printers on the market and much faster too. I know this because I work with such printers in my club. These more expensive printers are harder to set up and harder to get printing well. The printrbot makes this easy with their tutorials and the printer's inherent simplicity. Thank you Printrbot!
| 41 reviews
<p>This is a great little printer for the price. I actually regret not getting the larger model, now, but I can always print some upgrades! I built my own original MakerBot Cupcake "back in the day" and, though it was fun, I never was really satisfied with it as it was just a PITA to get going. Plus it was noxious with all the ABS fumes. The new PLA is much better, but there is still a bit of toxicity (~1/10th of ABS supposedly) with it so make sure you have decent ventilation. I put a HEPA filter next to mine and it seems to help. Actually, I'm wondering when they will start adding scents to the PLA filament to cover it up. HA!</p> <p>One problem though (-1 star). It looks like there might be some manufacturing defect with the base plate. There seems to be a "hump" in the top right edge if you are looking down at it while facing the print head. I had to do quick a bit of adjusting the base with some spacers to work it out but now that is done, it's working great. Incidentally there seems to be a lot of people that have the same issue in the same place so I expect there is some manufacturing problem that they might be able to correct at some point.</p> <p>Minor gripe: Need a better way to remove clogs from the print head. I had one and I was lucky I had a small drill and enough experience to disassemble it (though there are assembly instructions available and you just go in reverse). I would recommend that they include a little drill bit to help drill out the problem (burnt plastic) if you can't just take off the nozzle and push it out.</p>
| 41 reviews
This is the Assembled Metal Simple, its a great printer for the price. Works with Mac and PC. The Software is open source but you can purchase software if you like, Im tempted but Im pretty satisfied with the open source software (repeater and Sli3r) to make that jump yet. The print size is 6in x 6in x 6in I upgraded mine to print 8x8x10 made a big difference for me and I added a second fan for one of the motors which tend to run hot and stop printing on large prints. I would recommend this printer but if you know nothing about 3D printing expect there will be a learning curve.
| 41 reviews
<p>Great for the price. Ive seen things like makerbot, reprap etc... they all use the same software, but its the hardware that makes the difference. This thing rocks for the price!!</p> <p>I do a lot of mechanical design work, and I actually use it to print prototypes or partial prototypes to check size/fitment, prior to sending to manufacture.</p> <p>Great part, no proprietary materials. I was going to get the dremel commercial unit, but heard of problems, as well as locked up software and spool materials.</p>

Write a review

Your Name:

Your Review: Note: HTML Supported!

Rating: Bad           Good

Related Products /8/

Printrbot Play 3D Printer
22 reviews (22 reviews)
$499 USD $399 USD
This limited offer ends in:

3d printing latest news

View All News
UAE to Standardize 3D Pri Date posted - 27/10/2016

UAE to Standardize 3D Pri

Recent few weeks have highlighted a pattern — UAE’s construction ...

Read More
3D Printed Aquaponic Home Date posted - 26/10/2016

3D Printed Aquaponic Home

The uncontrolled increase in population, continuous rise in tempe...

Read More
3D Portable Smartphone La Date posted - 25/10/2016

3D Portable Smartphone La

The world is witnessing the technical revolution each day with th...

Read More
Researchers Explore 3D Pr Date posted - 24/10/2016

Researchers Explore 3D Pr

The use of 3D printing technology is advancing day by day. The te...

Read More

Last viewed

Printrbot Simple 3D Printer
41 reviews (41 reviews)
$539 USD
3D Printers Online Store © 2013-2016 All Rights Reserved.