Chris Del Grande


There are a couple design flaws that really screw the printer’s ability to print with ABS. The printer does not have a closed enclosure and the printer cannot retain heat, if you need to print with Abs get ready to buy a plastic enclosure for the printer.

The other issue is that the filament guide tube clamps on the back of the printer and sits too close to the printer. When you have a filament spool that sits at small distance from the printer, it can tend to pull the filament off the spool and begin to wrap around the filament spool holder, causing a jam. The filament then can't be pulled which will ruin your current print, and end up clogging the print nozzle.

To resolve the issue you need to get an external spool holder and the issue would be gone. Having said that the printer is a real steal for the price.

Sean Swayze


I purchased this printer in the month of October and have been thrilled with the whole 3d printing stuff ever since then. The printer came as an assembled unit, and it was a million times better my previous DIY kit (I advise to stay away from them, as their prices are luring but it’s a real head ache to get them running).

The printer has been running more than 100 hours a week and it still works like a new printer. I have experience a few nozzle clogging issues but it was due to cheaper Chinese filaments, however ever since I started using European filaments I have never had any issues.

Geeetech as a company is certainly one of the most under rated companies in 3d Printing and with solid product line I am sure things will change for better for them.

Bonny Dsouza


I bought Creator 3d printer as a learning experience with no experience at all in 3D printing. It arrived in good shape and I was able to get my first print within a few hours.

I have since printed over a dozen parts and they are getting better with every print. From looking at other’s prints online from various other printers, these are at least as good.

The printable area is not the biggest but it much larger than other value priced printers on the market. I am happy with my purchase.

Good support from Geeetech and 3dprintersonlinestore.

Matt Buchler


I got the printer working within 20 minutes of unboxing. I print for at least 12 hours a day using this printer.

The printer works rock solid, and the print quality if fine as well. I would say that if your expectations are reasonable; this is an amazing printer for the price. 3D printing is not just any other printing that we have heard off; it requires practice, patience and lot of perseverance. Don’t buy a printer if you are not ready for all this.

The only grudge I have with this printer is that it’s too slow; the fastest you can print on it is 80 mm/sec. If the developers could increase the printing speed this would be one of the better printers in the market.

Daron Pope


I purchased the Me Creator printer after researching on 3d printers for almost 6 months. I have to say that buying a 3d printer can be the most confusing purchase ever, so I decided to put my experience down in this review and may be it can help you buy a decent printer for yourself.

I purchased this printer after a recommendation from a friend who had been using this for some time now.

Don’t be fooled by the low cost of the printer as I feel it can give any $1000 and above printer a run for its money. I have been printing on it continues for past one month and never had a failed print. It is wonderful to see the ideas you have sitting on your laptop for over a few years finally come to life because of a 3d printer. The Aluminum Build Platform gives the printer a solid feel and looks more stable as well.

The printer is Easy setup out of the box. Don’t complain if you cannot follow the simple instruction manual. The print quality is decent and I can print using all kinds of standard plastic because of the heated bed. The LED inside the printer looks really cool at night, the machine also does not need a lot of space to store hence I have it installed just next to my computer on my desktop.

I would give this printer a 10 star if that was possible!!