Eric Francis

08/02/2016

Very nice printer. I've had it for a week and have tried PLA, PETG and ABS without problems. I made the thumbwheel modification right off the bat to make leveling the bed easier. Other than that, I haven't had to change much. Put some glass on the bed to print ABS. In order to do that, I needed to print off a z-axis endstop adjuster ([...]). I've been really happy with my results. Would definately recommend this printer.

Andrei

31/01/2016

This is a great 3D printer for the price. Got it in early Jan but only just got around to putting it together. A few issues though with the installation.

Only 2 Hex screws came with the unit but 6 are required to put the unit together. Luckily the local hardware shop had the right type (even the same elevated hex head) . They are M5 screws 10mm long. You need 4 for the base and 2 to attach the PLA cradle.

Once that was sorted found out that one of the contact switches had the metal tab ripped off. Fortunately it wasn't damaged so I removed the switch and was able to attach it properly. After that it was all steam ahead.

Setting up the print surface was very easy. Plugged in the SD card and printed the test object which came out fabulous. Now buying some more PLA and hoping I can get some 3D models from medical imaging to work.

Fingers crossed.

Nathan Law

24/01/2016

1st impression was very bad since the printer didnt work as the motherboard I received is damaged and even plate was bad, so I decided to take this to 3dprintersonlinestore and they redirected to Wanhao support team

it took 3 weeks overall for me to make my printer run

This printer is the upgraded version of the orignal version hence has lesser issues. The newer MK10 Extruder is a mean plastic melting extruder. It can easily go upto 260 hence works very well.

Seaneriver

21/01/2016

This is my first 3d printer set up in under an hour. Leveled and test print perfect. Direction for making on though missing important step of changing filament size to match but going good now. Love it and if your looking to learn it's great.

Angel Wong

17/01/2016

My printer was delivered in 15 days but safely. I was happy with the packing it was pretty easy to unbox. It took me around 10 minutes to understand how the printer works and the manual supplied was very helpful at that .

The printer comes with a matt black metal body and has a separate spool holder and display unit. Which is nice as you could just place it according to your convenience. The printer bed is huge and can print most stuff you throw at it. I have tried the heated printer bed and that heats up till 110 degrees which means most hard plastic like ABS sticks on it with ease.

The printer has a few workmanship issues like the One of the X axis bearing blocks rubs on a belt and with time i am sure i would need replacements soon. However these issues are not such that cannot be sorted with some technical skills.

I think you cannot find a better printer for the price its a great printer even with some flaws.