Steven Brown on 22/03/2016
89 reviews

Delivery was quick and well packed. I highly recommend laying everything out, and reading the instructions thoroughly before assembling this. I rushed through it and ended up putting the extruder stepped into one of the towers and then had to cut and join the wires since I did not want to have to disassemble the whole thing to correct my mistake. I also ended up using some of the nuts in the wrong place as there are several different types.

Oh, and I dropped the filament onto the glass bed cracking it, so I just used the supplied tape to tape it back together... Despite all of these, the prints are really great,Takes around 10 hours to assemble the whole thing, and its the first time I am making a 3d printer, and using one, given that its a cracked bed, I didnt really calibrate properly etc, I am very happy with my first print for easter!

Dillon Smith on 17/03/2016
89 reviews
This is an amazing 3d printer, at wonderful price, a must buy for anyone looking at a 3d printer. Was extremely fun to assemble. Only taking me 4 hours to get built. I would recommend configuring the printer and reading the user manual for configuring the printer and make sure to add g29 to the start code of your printer in repetier host so the printer can auto level.
Diego MiƱo on 17/03/2016
89 reviews

Everything was included. Setup was about a night or two. It definitely took longer to get things tuned in. I have updated my firmware to the latest Marlin firmware. It works great on this. I would recommend manually leveling the bed by adjusting the endstops then the print height, followed by correcting for the "bowl" or "dome" effect by changing the carriage offset.

The only cons I have are... -The effector rods are not equal to each other -The effector design is very inconsistent with auto leveling the bed -Doesn't include anything to hold the filament roll -Need better directions(I did find some from another company that I used instead, just Google for them) -

The MKS Mini board used does not directly support a bed heater if you add one -The MKS Mini doesn't support a second extruder as well (no extra outputs for the motor and heater) All in all, this is not bad for the price, just need to put some time in on the setup to get things going well.

Melissa Williams on 11/03/2016
89 reviews
Sent the wrong plug and a few things weren't crimped but over all happy with the product. It suits the job it is used for. Prints well and was a quick build. I would say that they need to double check all of their electrical connections before shipment. Thank you.
Martin Engwicht on 10/03/2016
89 reviews
Great delivery , parcel well packaged and everything was in order , a great deal !!! got it up and running and its working great .... i have Cartesian printers but this is my first delta , easy to set up everything needed is on the sd card .. Great great great !!!!