Makemendel | MegaBot Metal Chasis - Unassembled 3D Printer

Quick Overview

MegaBot is a fully working 3D Printer of build size 70 x 22 x 18.5 cm (LxWxH)

MegaBot comes with additional items such as:

  • Kapton tape.
  • Heated bed for PLA and ABS.
  • Power supply(450 Watt)
  • USB cable
  • Few meters of PLA
  • Linear motion guide
  • Flange Bearings
  • Flange nut etc

 

 

Technical Specification :

  • Machine size: 900 x 350 x 500mm
  • Metal Chasis.
  • Build size: 700 x 220 x 185mm (LxWxH).
  • Nozzle Diameter : 0.4mm.
  • Layer Thickness : 0.1 mm.
  • Speed (mm/s) : 60.
  • Positionning Precision : 27 microns.
  • Input Format : STL.
  • Technology : FFF (Fused Filament Fabrication).
  • Software : Pronterface (Open Source)
  • System Copatibility : Windows, Linux, MAC.
  • Weight : 35 Kg

             

Watch more videos here: http://www.youtube.com/results?search_query=makemendel

Dual Extruder Kit Includes : 

1) Dual Extruder Board 

2) Complete Extruder Set.

Features of MegaBot 3D Printer

  • LCD Controller Support
  • Dual Print Head
  • Spring PrintBed Adjustment.
  • It uses high quality linear motion guide.
  • Mechanically more Stable Compact design.
  • PrintrBoard and Power Supply are placed at the bottom to give clean and neat look.
  • Self locking design with accurate and easy belt placement.
  • Large build volume with easy accesibility.
  • Integrated power supply for both PrintrBoard and HeatBed.
  • Extruder is designed for easy filament changing.

This complete UnAssembled MegaBot 3D Printer contains :

  • PrintrBoard Electronics – includes presoldered endstops with molex connectors and high temperature heat cables for connecting Heater and Thermistor
  • All hardware, bearings, bolts, nuts, washers, Linear motion guide, Flange Bearings, Flange nut etc
  • M8 Threaded rods (296mm)
  • Chrome plated Smooth rods (333mm)
  • 5 Stepper Motors – with presoldered 4 Pin Molex connectors
  • MK7 Drive Gear - for direct drive on motor shaft (5mm inner diameter)
  • Pre-assembled J-Hotend, including G550 Thermistor, Cartridge heater, Cooling fan, etc
  • Kapton tape 15mm and 40 mm (Insulation of Thermistor legs)
  • Glass / Acrylic HeatBed
  • Cooling paste (To use between Printbed and Heater blocks)
  • PTFE strain-relief
  • GT2 belts and pulleys
  • Power Supply 450W, Input: AC 100-240V, 50-60Hz, 1.3A, Output: DC 12V, 37.5A
  • USB and Power supply cables
  • 2GB Micro SD Card
  • Extras such as Endstop, Magnetic leveler, Forceps, Few meter of PLA, Plastic tie etc.

Lead Time: 3 to 4 Days.

Product Condition
Manufacturer Warranty for electronics - intial 14 days after receiving order
Printing Specifications
Print size ( X Y Z ) 700 x 220 x 185 mm
Print Speed 60 mm/sec
Layer Resolution 100 Microns
Filament Diameter 1.75mm , 3mm
Nozzle Diameter 0.4 mm
Filament Compatibility ABS & PLA
Print Plate Size 740 x 220 mm
Print in dual color No
Print in multi color No
Mechanical Specifications
Chassis Metal
No.of Extruders Two
Print Plate (Build Platform) Glass fibre
Software Specifications
3D Printing Software Pronterface, Cura
Supported File Formats .stl, .gcode
Operating System Windows, Linux, MAC
Electrical Specifications
AC Input 12V
Power Requirements 450 watt, 12V
Connectivity (Interface) USB Cable, LCD Controller
Electronics Specifications
Electronics (Motherboard) PrintrBoard REV D
Shipping specifications
Machine weight 35 kg
Shipping box weight 40 kg
Machine Dimensions 900 x 350 x 500 mm
Shipping Location India
Lead Time (Processing/Handling Time) 3 to 4 days

Write a review

Note: HTML is not translated!
    Bad           Good

MakeMendel | MegaBot - Large 3D Printer

Product Code: 3DPO-101
Availability: In Stock
$1,299 USD

Available Options


Tags: makemendel, large 3d printer, mega 3d printer