Makemendel | Plusbot 2.0 Fully Assembled 3D Printer

Quick Overview

PlusBot is a fully working 3D Printer (build size 22 x 22 x 16.5 cm) .

Technical Specification :

  • Machine size: 450 x 350 x 370mm.
  • Build size: 220 x 220 x 165mm (LxWxH.)
  • Nozzle Diameter : 0.4mm.
  • Layer Thickness : 0.1 mm.
  • Speed (mm/s) : 60.
  • Positionning Precision : 27 microns.
  • Input Format : STL.
  • Technology : FFF (Fused Filament Fabrication.
  • Software : Pronterface (Open Source).
  • System Copatibility : Windows, Linux, MAC.
  • Power Supply : 20A SMPS Power Supply,250W.
  • Weight : 12 Kg.



Watch more videos here:


Features of PlusBot 2.0 3D Printer

  • Metal Body
  • Filament Spool fits inside the Printer Body
  • LCD Controller Support. No more PC dependencies.
  • Spring PrintBed Adjustment.
  • ACME Lead screw with nut.
  • It uses high quality linear motion guide.
  • Mechanically more Stable Compact design.
  • PrintrBoard and Power Supply are placed at the bottom to give clean and neat look.
  • Self locking design with accurate and easy belt placement.
  • Large build volume with easy accesibility.
  • Uses high quality acrylic.
  • Integrated Power supply for both PrintrBoard and HeatBed.
  • Extruder is designed for easy filament changing.

This complete PlusBot 2.0 3D Printer contains :

This kit contains everything required for running 3D printer. You need not to buy anything else.

  • PrintrBoard Electronics – with presoldered endstops with molex connectors and high temperature heat cables for connecting Heater and Thermistor.
  • All hardware, bearings, bolts, nuts, washers, Linear motion guide, Flange Bearings, Flange nut etc.
  • All acrylic sheets (Side plates, Bottom plate, Top plate, Middle plate, Y frog support, Extruder base, Extruder motor plate, Heated printbed).
  • M8 Threaded rods (255mm).
  • Chrome plated Smooth rods (333mm).
  • 4 Stepper Motors – with presoldered Molex connectors.
  • MK7 Drive Gear - for direct drive on motor shaft (5mm inner diameter).
  • Pre-assembled J-Hotend, including G550 Thermistor, Heat Resistor, Cooling fan, etc.
  • Kapton tape 15mm (Insulation of Thermistor legs).
  • Kapton tape 40mm (To print on).
  • Set of 4 Heater blocks, 4 x 1.0 Ohm (for Heated printbed).
  • Cooling paste (To use between Printbed and Heater blocks).
  • PTFE strain-relief.
  • T2.5 belts and pulleys.
  • Power Supply 450W, Input: AC 100-240V, 50-60Hz, 1.3A, Output: DC 12V, 37.5A.
  • USB and Power supply cables.
  • 2GB Micro SD Card.
  • Extras such as Endstops, Magnetic leveler, Forceps, Few meter of PLA, Plastic tie etc.
  • PCB Heatbed.

Lead Time : 1-2 days.

Delivery Time : 3-4 days after dispatch.

Product Condition
Manufacturer Warranty 3 months
Printing Specifications
Print size ( X Y Z ) 220 x 220 x 165 mm
Print Speed 60 mm/sec
Layer Resolution 100 microns
Filament Diameter 1.75mm , 3mm
Nozzle Diameter 0.4 mm
Filament Compatibility ABS & PLA
Print Plate Size 214 x 214 mm
Print in dual color YES
Print in multi color No
Mechanical Specifications
Chassis High Quality Metal with Powder coating
No.of Extruders Two
Print Plate (Build Platform) heated bed or glass fibre
Software Specifications
3D Printing Software Pronterface, Cura
Supported File Formats .stl, .gcode
Operating System Windows, Linux, MAC
Electrical Specifications
AC Input 12V, 20Amp
Power Requirements 450 watt, 12V
Connectivity (Interface) USB Cable, Micro SDCard
Electronics Specifications
Electronics (Motherboard) PrintrBoard REV D
Shipping specifications
Machine weight 12 kg
Shipping box weight 22 kg
Machine Dimensions 450 x 350 x 370 mm
Shipping Location India
Lead Time (Processing/Handling Time) 2 to 3 Days

Write a review

Note: HTML is not translated!
    Bad           Good

MakeMendel | PlusBot 2.0 3D Printer

Product Code: 3DPO-155
Availability: In Stock
$1,149 USD

Available Options

Tags: MakeMendel, PlusBot, 3d printing, india