The New Folger Tech FT-5 R2 Large Scale 3D Printer Kit

This is an updated 3D Printer of Folger tech FT-5

The Folger Technologies FT-5 R2 is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine with the use of a few simple tools and a little bit of time you too can get started 3D printing the world's next big idea. 

The highlights of this kits are the massive 300x300x400mm (12x12c15.75") build area, Linear rails on the X and Y movements. Dual Y motors for added speed and power. This kit also includes an aluminum build surface/headed bed capable of printing many materials including PLA and ABS.

Lead Time : 7 to 10 Business Days

This kit includes the following:

  • 2004 LCD with SD card Reader
  • New! CNC Cut ACM (Aluminum Composite Material) Frame Panels 

  • x4 LMF8LUU Linear Bearings

  • x8 SHF8 Mounts
  • x4 KP08 bearings

  • x3 Idler Pulley

  • 4x 8mm Chromed Linear Rod for  Z (Pre-Cut)

  • 2x T8 4 Start Lead Screw 8mm pitch 

  • x1 300mmx300mm Heated Bed

  • x1 Direct Drive Extruder w/ Injection Molded Parts for 1.75mm ABS/PLA/Wood/HIPS/PETG 

  • New! 480W 24v Power Supply

  • x5 NEMA 17 5.0kg/cm Stepper Motors

  • 3x 400mm 12mm Linear Rails
  • x3 Meters of GT2 Belt

  • x1 GT2-978 Belt
  • x6 20 Tooth Pulleys

  • x1 MKS Gen 1.4 Controller

  • x4 A4988 Stepper Drivers 

  • x1 Roll of 8mm Kapton Tape

  • x3 Electronic End Stop Circuits w/ LED

  • x5 Belt Tensioners

  • x8 Threaded Bed Adjustment Knobs

  • x8 Bed Springs

  • All Required Nuts/Bolts for Assembly

  • Power Cable


  • Impressive 300mmx300mmx~400mm Build Area

  • Able to print ABS & PLA Plastic (1.75mm)

  • Can run 110V or 220V (Only Comes With US Cord)





  • Print Area: 300x300x~400mm (12x12x15.75") Build area
  • Printer Size: 740mmx500mmx540mm
  • Power: 480w 24V system CE rated Power Supply, can use 110v or 220v (US Cord Provided)
  • Max Extruder Temp: 245C (can reach higher but will shorten the longevity of the extruder)
  • Max Bed Temp: 120C
  • X/Y Linear Rail System
  • Z T8 4 Start  Lead screws
  • Controller: MKS Gen 1.4
  • Resolution: 0.05mm (50 Microns)
  • Max Stable Speed: TBA
  • 24V Heated Bed
  • SHIPPING WEIGHT 45lbs! (21kg)

Updates over the FT-5 R1:

  • Higher wattage bed for faster heating, now at 24vdc vs 12vdc
  • Redesign extruder mount, far more rigid 
  • Single motor Z axis, reduces the need for adjustments as often.
  • NO MORE MELAMINE! All CNC cut ACM (Aluminum Composite Material)
  • Updated Idlers


This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.

Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.

However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.

Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.

High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.

We wouldn't recommend leaving your printer running unattended.We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.


Product Condition
Item Condition New
Manufacturer Warranty 14 DAY-REPLACEMENTS for Manufacturer Defect, 14 DAY-RETURN Unopened/Unassembled
Printing Specifications
Print size ( X Y Z ) 300 x 300 x 400 mm
Print Speed 100 to 180 mm/sec
Layer Resolution 50 microns
Print Precision (Layer Thickness) .05 mm
Filament Diameter 1.75 mm
Nozzle Diameter 0.4 mm
Filament Compatibility ABS, PLA, Wood, HIPS and PETG
Mechanical Specifications
Chassis CNC Cut ACM (Aluminum Composite Material) Frame Panels
Extruder Type Direct Drive MK9
No.of Extruders One
Print Plate (Build Platform) 24V HeatBed
Print Head/Hotend/Nozzle Type MK9
Stepper Motors NEMA 17
Software Specifications
Supported File Formats STL
Operating System Windows/MAC/Linux
Temperature Specifications
Extruder Temperature 245 C (can reach higher but will shorten the longevity of the extruder)
Heating Bed Temperature 100 C
Electrical Specifications
AC Input 480W 24v Power Supply
Power Requirements 110V or 220V
Connectivity (Interface) USB, SD Card
Electronics Specifications
Electronics (Motherboard) MKS Gen 1.4
Shipping specifications
Machine weight 19.5 Kg
Shipping box weight 21 Kg
Machine Dimensions 740mmx500mmx540mm
Shipping box dimensions 610 x 610 x 152 mm
Shipping Location New Hampshire USA
Lead Time (Processing/Handling Time) 7 to 10 business days

Write a review

Note: HTML is not translated!
    Bad           Good

Folger Tech FT-5 R2 Large Scale 3D Printer Kit

Product Code: 3DPO-363
Availability: In Stock
$499 USD $699 USD

Tags: Ft 5, r2, folgertech, large scale