Anycubic UV Resin for Photon DLP 3D Printer (500ml)

Lead Time : 3 to 5 Business Days


Resin parameter

Hardness: 79 D

Viscosity(25℃): 552 mpa.s

Curing wavelength: 405 nm

Liquid density: 1.1

Solid density: 1.184 g/cm³

Shrinkage: 7.1%

Tensile strength: 23.4 Mpa

Curing time: 6-10 s

Elongation at break: 14.2%

Color: black / white / gray / yellow / green

Shelf life: 1 year

Terms and Conditions:

Shake well before use, please wear a glove mask, the recommended temperature 20-25 ℃, to avoid dust and the environment.
This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.
Save notes:
It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure photosensitive resin.

Write a review

Note: HTML is not translated!
    Bad           Good

Anycubic UV Sensitive Resin 500ml 405nm

Product Code: 3DPO-397
Availability: In Stock
$59 USD $80 USD

Available Options

Tags: anycubic resin