Folger Tech FT-6 Large CoreXY 3D Printer Kit
The FT-6 is being offered for pre-sale with estimated ship dates, this is done to help keep up with demand, as we roll out the FT-6. Lead time : 20 Business Days.
- Print Area: 720x350x~400mm Build area
- Printer Size: 1040mmx540mmx750mm
- Power: 24V system CE rated Power Supply, 700W 110V Silicone heated bed
- Max Extruder Temp: 245C (can reach higher but will shorten the longevity of the extruder)
- Max Bed Temp: 120C
- X/Y Linear Rail System
- Z T8 4 Start Lead screws
- Controller: Marlin Based Controller
- Resolution: 0.05mm (50 Microns)
- No Extruder: You will get the ACM carriage parts used on the single extruder, but no motor or other extruder components
- Single Extruder : All parts needed for a direct driver single color extruder setup.
- Dual Extrduer: All parts needed for a single tip dual color bowden setup with inductive auto-level
- No LCD: You will only be able to run the printer via a PC
- 12864 Graphical LCD with SD reader, simple and effective
- 7" Color Touch screen with R Pi clone with WIFI connectivity
** As we receive customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you receive might reflect some of these slight changes and improvements.
The Folger Technologies FT-6 and FT-5 are great kits combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine with the use of a few simple tools and a little bit of time you too can get started 3D printing the world's next big idea.
The highlights of this kits are the massive 720x350x400mm build area, Linear rails on the X and Y movements. Dual Y motors for added speed and power. This kit also includes an aluminum build surface/headed bed capable of printing many materials including PLA and ABS.
This kit includes the following:
- CNC Cut ACM (Aluminum Composite Material) Frame Panels
- LMF8LUU Linear Bearings
- SHF8 Mounts
- KP08 bearings leadscrew mounts
- Idler Pulley
- 8mm Chromed Linear Rods
- T8 4 Start Lead Screw 8mm pitch
- 720mmx350mm 1/8" aluminium bed with 110V Silicone Heater
- 24v Power Supply
- NEMA 17 Stepper Motors
- 400mm 12mm Linear Rails (Y Axis)
- 800mm 12mm Linear Rails(X Axis)
- GT2 Belt
- MKS Controller
- All Required Nuts/Bolts for Assembly
- Power Cable
- Impressive 720mmx350mmx~400mm Build Area
- Able to print ABS / PLA / PETG Plastic (1.75mm)
- Can run 110V (Only Comes With US Cord)
Items you will need:
Build Guide and Firmware/Software:
** Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records.
Google Drive Link: (Build Guide and Firmware) [link will be updated soon]
This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.
Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.
However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.
Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 110V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 110V but bear in mind there can still be high currents involved and even at 110V they shouldn't be taken lightly.
High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.
We wouldn't recommend leaving your printer running unattended.We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.