Makemendel | RapidBot 3.0 With 1Kg Free PLA

Quick Overview

RapidBot 3.0- Desktop 3D Printer with build size of 22 x 22 x 16.5cm.

Technical Specification :

  • Machine size: 450 x 350 x 370mm
  • Build size: 220 x 220 x 165mm
  • Nozzle Diameter : 0.4 mm
  • Layer Thickness : 0.1 mm
  • Speed : 60 mm/s
  • Positioning Precision : 27 microns
  • Input Format : STL
  • Technology : FFF (Fused Filament Fabrication)
  • Software : Pronterface (Open Source)
  • System Copatibility : Windows, Linux, MAC.
  • Power Supply : ATX, 450W
  • Weight : 12 KG

Features of RapidBot 3.0 3D Printer:

  • 0.4 Nozzle diameter allows100 micron layer height.
  • Printing speed : 60mm/s.
  • Inut formats : STL, GCode
  • Print with SD card, Computer is no more required.
  • LCD Controller Support
  • It uses high quality linear motion guide.
  • PrintrBoard and Power Supply are placed at the bottom to give clean and neat look.
  • Mechanically more Stable Compact design.
  • Improved PrintBed Adjustment.
  • Improved Extruder Design and Z axis.
  • Accurate and easy belt placement.
  • Large build volume with easy accesibility.
  • Uses high quality acrylic from: www.perspex.co.uk
  • Integrated Power supply for both PrintrBoard and HeatBed.
  • Uses high quality GT2 belts and pulley(Aluminium) , to give high accuracy.
  • Self locking design ensures rigid frame.
  • Extruder is designed for easy filament changing.

 

 

 

             

Watch more videos here: http://www.youtube.com/results?search_query=makemendel

This complete RapidBot 3.0 3D Printer contains :

This kit contains everything required for running 3D printer. You need not to buy anything else.

  • PrintrBoard Electronics – with presoldered endstops with molex connectors and high temperature heat cables for connecting Heater and Thermistor
  • All hardware, bearings, bolts, nuts, washers, Linear motion guide, Flange Bearings, Flange nut etc
  • All acrylic sheets (Side plates, Bottom plate, Top plate, Middle plate, Y frog support, Extruder base, Extruder motor plate, Heated printbed)
  • M8 Threaded rods (255mm)
  • Chrome plated Smooth rods (292mm)
  • 5 Stepper Motors – with presoldered Molex connectors
  • M4 Brass insert piece - for direct drive on motor shaft (5mm inner diameter)
  • Pre-assembled J-Hotend, including G550 Thermistor, Heat Resistor, Cooling fan, etc
  • Kapton tape 15mm (Insulation of Thermistor legs)
  • Kapton tape 40mm (To print on)
  • Set of 4 Heater blocks, 4 x 1.0 Ohm (for Heated printbed)
  • Cooling paste (To use between Printbed and Heater blocks)
  • PTFE strain-relief
  • GT2 belts and pulleys
  • USB and Power supply cables
  • 2GB Micro SD card
  • Extras such as Endstops, Magnetic leveler, Forceps, Few meter of PLA, Plastic tie etc.

Lead Time: 2 to 3 Days.

Product Condition
Manufacturer Warranty for electronics - intial 14 days after receiving order
Printing Specifications
Print size ( X Y Z ) 220 x 220 x 165 mm
Print Speed 60 mm/sec
Layer Resolution 100 microns
Filament Diameter 1.75mm , 3mm
Nozzle Diameter 0.4 mm
Filament Compatibility ABS & PLA
Print Plate Size 214 x 214 mm
Print in dual color No
Print in multi color No
Mechanical Specifications
Chassis Acrylic
No.of Extruders One
Print Plate (Build Platform) heated bed or glass fibre
Software Specifications
3D Printing Software Pronterface, Cura
Supported File Formats .stl, .gcode
Operating System Windows, Linux, MAC
Electrical Specifications
AC Input 12V
Power Requirements 450 watt, 12V
Connectivity (Interface) USB Cable, LCD Controller
Electronics Specifications
Electronics (Motherboard) PrintrBoard REV D
Shipping specifications
Machine weight 12 kg
Shipping box weight 20 kg
Machine Dimensions 450 x 350 x 370 mm
Shipping Location India
Lead Time (Processing/Handling Time) 2 to 3 Days

Write a review

Note: HTML is not translated!
    Bad           Good

MakeMendel | RapidBot 3.0 3d printer

Product Code: 3DPO-099
Availability: In Stock
$749 USD

Available Options


Tags: makemendel, rapidbot, 3d printer