Makemendel | MegaBot Metal Chasis - Unassembled 3D Printer
Quick Overview
MegaBot is a fully working 3D Printer of build size 70 x 22 x 18.5 cm (LxWxH)
MegaBot comes with additional items such as:
- Kapton tape.
- Heated bed for PLA and ABS.
- Power supply(450 Watt)
- USB cable
- Few meters of PLA
- Linear motion guide
- Flange Bearings
- Flange nut etc
Technical Specification :
- Machine size: 900 x 350 x 500mm
- Metal Chasis.
- Build size: 700 x 220 x 185mm (LxWxH).
- Nozzle Diameter : 0.4mm.
- Layer Thickness : 0.1 mm.
- Speed (mm/s) : 60.
- Positionning Precision : 27 microns.
- Input Format : STL.
- Technology : FFF (Fused Filament Fabrication).
- Software : Pronterface (Open Source)
- System Copatibility : Windows, Linux, MAC.
- Weight : 35 Kg
Watch more videos here: http://www.youtube.com/results?search_query=makemendel
Dual Extruder Kit Includes :
1) Dual Extruder Board
2) Complete Extruder Set.
Features of MegaBot 3D Printer
- LCD Controller Support
- Dual Print Head
- Spring PrintBed Adjustment.
- It uses high quality linear motion guide.
- Mechanically more Stable Compact design.
- PrintrBoard and Power Supply are placed at the bottom to give clean and neat look.
- Self locking design with accurate and easy belt placement.
- Large build volume with easy accesibility.
- Integrated power supply for both PrintrBoard and HeatBed.
- Extruder is designed for easy filament changing.
This complete UnAssembled MegaBot 3D Printer contains :
- PrintrBoard Electronics – includes presoldered endstops with molex connectors and high temperature heat cables for connecting Heater and Thermistor
- All hardware, bearings, bolts, nuts, washers, Linear motion guide, Flange Bearings, Flange nut etc
- M8 Threaded rods (296mm)
- Chrome plated Smooth rods (333mm)
- 5 Stepper Motors – with presoldered 4 Pin Molex connectors
- MK7 Drive Gear - for direct drive on motor shaft (5mm inner diameter)
- Pre-assembled J-Hotend, including G550 Thermistor, Cartridge heater, Cooling fan, etc
- Kapton tape 15mm and 40 mm (Insulation of Thermistor legs)
- Glass / Acrylic HeatBed
- Cooling paste (To use between Printbed and Heater blocks)
- PTFE strain-relief
- GT2 belts and pulleys
- Power Supply 450W, Input: AC 100-240V, 50-60Hz, 1.3A, Output: DC 12V, 37.5A
- USB and Power supply cables
- 2GB Micro SD Card
- Extras such as Endstop, Magnetic leveler, Forceps, Few meter of PLA, Plastic tie etc.
Lead Time: 3 to 4 Days.
Product Condition |
Manufacturer Warranty |
for electronics - intial 14 days after receiving order |
Printing Specifications |
Print size ( X Y Z ) |
700 x 220 x 185 mm |
Print Speed |
60 mm/sec |
Layer Resolution |
100 Microns |
Filament Diameter |
1.75mm , 3mm |
Nozzle Diameter |
0.4 mm |
Filament Compatibility |
ABS & PLA |
Print Plate Size |
740 x 220 mm |
Print in dual color |
No |
Print in multi color |
No |
Mechanical Specifications |
Chassis |
Metal |
No.of Extruders |
Two |
Print Plate (Build Platform) |
Glass fibre |
Software Specifications |
3D Printing Software |
Pronterface, Cura |
Supported File Formats |
.stl, .gcode |
Operating System |
Windows, Linux, MAC |
Electrical Specifications |
AC Input |
12V |
Power Requirements |
450 watt, 12V |
Connectivity (Interface) |
USB Cable, LCD Controller |
Electronics Specifications |
Electronics (Motherboard) |
PrintrBoard REV D |
Shipping specifications |
Machine weight |
35 kg |
Shipping box weight |
40 kg |
Machine Dimensions |
900 x 350 x 500 mm |
Shipping Location |
India |
Lead Time (Processing/Handling Time) |
3 to 4 days |