Makemendel | Plusbot 2.0 Fully Assembled 3D Printer

Quick Overview

PlusBot is a fully working 3D Printer (build size 22 x 22 x 16.5 cm) .

Technical Specification :

• Machine size: 450 x 350 x 370mm.
• Build size: 220 x 220 x 165mm (LxWxH.)
• Nozzle Diameter : 0.4mm.
• Layer Thickness : 0.1 mm.
• Speed (mm/s) : 60.
• Positionning Precision : 27 microns.
• Input Format : STL.
• Technology : FFF (Fused Filament Fabrication.
• Software : Pronterface (Open Source).
• System Copatibility : Windows, Linux, MAC.
• Power Supply : 20A SMPS Power Supply,250W.
• Weight : 12 Kg.

Watch more videos here: http://www.youtube.com/results?search_query=makemendel

Features of PlusBot 2.0 3D Printer

• Metal Body
• Filament Spool fits inside the Printer Body
• LCD Controller Support. No more PC dependencies.
• Spring PrintBed Adjustment.
• ACME Lead screw with nut.
• It uses high quality linear motion guide.
• Mechanically more Stable Compact design.
• PrintrBoard and Power Supply are placed at the bottom to give clean and neat look.
• Self locking design with accurate and easy belt placement.
• Large build volume with easy accesibility.
• Uses high quality acrylic.
• Integrated Power supply for both PrintrBoard and HeatBed.
• Extruder is designed for easy filament changing.

This complete PlusBot 2.0 3D Printer contains :

This kit contains everything required for running 3D printer. You need not to buy anything else.

• PrintrBoard Electronics – with presoldered endstops with molex connectors and high temperature heat cables for connecting Heater and Thermistor.
• All hardware, bearings, bolts, nuts, washers, Linear motion guide, Flange Bearings, Flange nut etc.
• All acrylic sheets (Side plates, Bottom plate, Top plate, Middle plate, Y frog support, Extruder base, Extruder motor plate, Heated printbed).
• M8 Threaded rods (255mm).
• Chrome plated Smooth rods (333mm).
• 4 Stepper Motors – with presoldered Molex connectors.
• MK7 Drive Gear - for direct drive on motor shaft (5mm inner diameter).
• Pre-assembled J-Hotend, including G550 Thermistor, Heat Resistor, Cooling fan, etc.
• Kapton tape 15mm (Insulation of Thermistor legs).
• Kapton tape 40mm (To print on).
• Set of 4 Heater blocks, 4 x 1.0 Ohm (for Heated printbed).
• Cooling paste (To use between Printbed and Heater blocks).
• PTFE strain-relief.
• T2.5 belts and pulleys.
• Power Supply 450W, Input: AC 100-240V, 50-60Hz, 1.3A, Output: DC 12V, 37.5A.
• USB and Power supply cables.
• 2GB Micro SD Card.
• Extras such as Endstops, Magnetic leveler, Forceps, Few meter of PLA, Plastic tie etc.
• PCB Heatbed.

Lead Time : 1-2 days.

Delivery Time : 3-4 days after dispatch.