Printrbot Simple 3D Printer with Heated Bed

Share and you can get discount
$5 USDfor share
Seller: Printrbot
Product Code: 228/
Availability: In Stock

Price: $689 USD
Have you seen cheaper?
Have you seen cheaper? Tell us and get it more cheaper.

Order 2 or more units for $685 USD
Order 5 or more units for $680 USD
Order 10 or more units for $675 USD
Order 20 or more units for $670 USD

Available Options

* Choose Your Model:

Estimate Shipping:

Region / State:
Post Code:
Payment Methods:
14 reviews   Rating: 4/5.
Based on 14 reviews   |  Write a review

Printrbot Simple 3D Printer with Heated Bed

Printrbot’s first all-metal 3D Printer kit now available with a heated bed. The all metal construction combined with a GT2 belt pulley system produces a 3D print that rivals those of other manufacturers which cost thousands more!

Printrbot Simple 3D Printer with Heated Bed


Lead Time: 1 Business day

Technical Specifications:

  • Model: 1403.
  • Build Volume: 6″ x 6″ x 6″ / 150mm x 150mm x 150mm / 216 cubic inches.
  • Print Resolution: 50 Microns.
  • Print Speed: 80mm/sec max recommended.
  • Filament: 1.75mm PLA (sample included) and ABS.
  • Extruder: Alu Extruder (direct drive) with 1.75mm Ubis Hot End with 0.4mm nozzle.
  • Auto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height.
  • Print Bed: Heated (0.3mm level tolerance). Max temperature – 80C.
  • Construction: Powder coated steel and aluminum body with 8mm and 12mm diameter linear shaft.
  • Belt: GT2.
  • Pulleys: 20 tooth, dual flange GT2 aluminum.
  • Electronics: Printrbot Rev F Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing.
  • Software:Printrbot does not provide software, but recommends Cura v15.04 – available for free download.
  • Power Requirements: 12V (29 amp) ATX power supply (included).
  • Motors: NEMA 17 stepper.
  • Overall Footprint*: 18″ x 17″ x 13″ (L x W x H).

*Overall Footprint is the space needed to operate the full range of motion for the machine – X, Y, and Z axes travel.

Technical Specifications
Print size ( X Y Z ) 150 x 150 x 150 mm
The Layer Thickness 0.05 mm - 0.4 mm
Layer Resolution 50 microns
Chassis Powder coated steel and aluminum body
Filament Compatibility ABS & PLA
Filament Diameter 1.75mm
Nozzle Diameter 0.4 mm
Print Speed 30 to 80 mm/sec
Print Plate (Build Platform) Heated (0.3mm level tolerance)
Extruder Type Alu Extruder v2 (direct drive)
No.of Extruders One
Print Head/Hotend/Nozzle Type Ubis Hot End
Power Requirements 12V (29 amp) ATX power supply
Connectivity (Interface) USB
Electronics Printrbot Rev F Printrboard
3D printing Software Cura v15.04
CAD Input data file format supported STL, G-code
Client Operating System Windows, Linux, Mac
Machine Dimensions 457 x 431 x 330 mm
Shipping box dimensions 355 x 254 x 406 mm
Shipping box weight 10.4 kg
Lead time 1 Business day
Shipping Location USA
Manufacturer Warranty 30 days
| 14 reviews
The kit was fun to put together. It prints pretty well. Lots of little tweaks you can do and lots to learn at first. I've gotten many nice prints from it. I use PLA and Ninjaflex.
| 14 reviews
Calibrated and ready to go out of the box, didn't have to fiddle with settings. Was up and printing in about an hour.
| 14 reviews
Product itself would be a great deal, however the kit was assembled wrong, wiring harness were switched around so they made the z axis very long and the y axis very short. So my print volume was restricted to only be 4 inches. Bent parts and bad components such as the fan mosfet on the board and the fan itself. Another side note, the way the spool holder works its possible the z axis will hit it and really mess things up
| 14 reviews
<p>This is my first 3D printer. I read quite a bit about all of the various printers out there, and decided to go with an assembled Printrbot Metal, as it had the right balance between price and convenience (i.e., no assembly).</p> <p>Perhaps I'm lucky, but this thing has been working near perfectly from the moment I took it out of the box, with no additional calibration whatsoever. I simply plugged it in, followed the setup guide from the printrbot website, and started printing.</p>
| 14 reviews
Just got my Simple Metal Printer up and running and I have to say WOW. There is some serious quality in this machine. It comes with all you need to get up and running quickly, even some filament to get started. This bot is great for beginners and a high quality piece of kit for more experienced users.

Write a review

Your Name:

Your Review: Note: HTML Supported!

Rating: Bad           Good

Related Products /5/

Printrbot Play 3D Printer
22 reviews (22 reviews)
$499 USD $399 USD
This limited offer ends in:
Printrbot Simple 3D Printer
41 reviews (41 reviews)
$539 USD
Novio 3D - Fablab 106 - Foldable 3D Printer
4 reviews (4 reviews)
$1,299 USD $999 USD
This limited offer ends in:

3d printing latest news

View All News
UAE to Standardize 3D Pri Date posted - 27/10/2016

UAE to Standardize 3D Pri

Recent few weeks have highlighted a pattern — UAE’s construction ...

Read More
3D Printed Aquaponic Home Date posted - 26/10/2016

3D Printed Aquaponic Home

The uncontrolled increase in population, continuous rise in tempe...

Read More
3D Portable Smartphone La Date posted - 25/10/2016

3D Portable Smartphone La

The world is witnessing the technical revolution each day with th...

Read More
Researchers Explore 3D Pr Date posted - 24/10/2016

Researchers Explore 3D Pr

The use of 3D printing technology is advancing day by day. The te...

Read More

Last viewed

3D Printers Online Store © 2013-2016 All Rights Reserved.