Printrbot Play 3D Printer

Share and you can get discount
$5 USDfor share
Seller: Printrbot
Product Code: 227/
Availability: In Stock

Price: $499 USD $399 USD
Have you seen cheaper?
Have you seen cheaper? Tell us and get it more cheaper.
This limited offer ends in:
Hurry! Only 7 left!
137 purchased

Order 2 or more units for $399 USD
Order 5 or more units for $395 USD
Order 10 or more units for $390 USD
Order 20 or more units for $385 USD

Available Options

* Choose Your Model:

Estimate Shipping:

Region / State:
Post Code:
Payment Methods:
22 reviews   Rating: 4/5.
Based on 22 reviews   |  Write a review

Printrbot Play 3D Printer-Autolevelling Gear up

Printrbot is excited to announce the Play! Rounding out the Printrbot product line with our latest metal construction 3d printer, the Play features a 4″ x 4″ x 5″ build volume on an ultra-flat mic 6 print bed. The Printrbot Play is the first bot to come standard with the new Alu Extruder v2.

Printrbot Simple has used Marlin’s official code to Auto level the bed and print a cube on a severely slanted print bed.

Auto leveling:

Auto leveling isn’t exactly what it sounds like. Instead of using motors to actually make the bed perfectly level,  it uses software and the Z endstop (microswitch) to probe the bed, map the incline and print perfectly perpendicular to the surface even on a bed that ISN’T level.  We decided to try a dramatic incline to illustrate the power of this feature

printrbot play 3d printer
printrbot play 3d printer


Lead Time: 1 Business day

Technical Specifications:

  • Model: 1505.
  • Build Volume X-Y-Z: 100mm x 100mm x 130mm (apx 4″ x 4″ x 5″ / 80 cubic inches).
  • Print Resolution: 50 Microns.
  • Print Speed: 80mm/sec max recommended.
  • Filament: 1.75mm PLA (sample included).
  • Extruder: Alu Extruder v2 (direct drive) with 1.75mm Ubis Hot End with 0.4mm nozzle.
  • Auto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height.
  • Print Bed: Not heated (0.3mm level tolerance).
  • Construction: Powder coated steel and aluminum body with 8mm diameter linear shaft.
  • Belt: GT2.
  • Pulleys: 20 tooth, dual flange GT2 aluminum.
  • Electronics: Printrbot Rev F Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing.
  • Software: Printrbot does not provide software, but recommends Cura v15.04 – available for free download.
  • Power Requirements: 12V (6 amp) laptop power supply (included).
  • Motors: NEMA 17 stepper.
  • Overall Footprint*: 14″ x 11″ x 12″ (D x W x H).

printrbot play steps

*Overall Footprint is the space needed to operate the full range of motion for the machine – X, Y, and Z axes travel.

Technical Specifications
Print size ( X Y Z ) 100 x 100 x 130 mm
The Layer Thickness 0.05 mm - 0.4 mm
Layer Resolution 50 microns
Chassis Powder coated steel and aluminum body
Filament Compatibility PLA
Filament Diameter 1.75mm
Nozzle Diameter 0.4 mm
Print Speed 30 to 80 mm/sec
Print Plate (Build Platform) Aluminium plate (Not heated)
Extruder Type Alu Extruder v2 (direct drive)
No.of Extruders One
Print Head/Hotend/Nozzle Type Ubis Hot End
Power Requirements 12V (6 amp) laptop power supply
Connectivity (Interface) USB
Electronics Printrbot Rev F Printrboard
3D printing Software Cura v15.04
CAD Input data file format supported STL, G-code
Client Operating System Windows, Linux, Mac
Machine Dimensions 355 x 279 x 304 mm
Shipping box dimensions 520 * 470 * 240 mm
Shipping box weight 6.8 kg
Lead time 1 Business day
Shipping Location USA
Manufacturer Warranty 30 days
| 22 reviews
You must get the heated bed, it makes things much easier. Be ready to give it a lot of time to calibrate.
| 22 reviews
<p>Excellent first-time in-home printer!</p> <p>Arrived well packaged, full assembled, and (mostly) calibrated. After following the online setup directions, I was printing tests within an hour. I decided to purchase this printer - after many hours of comparing options - because I wanted to make sure that I would actually use a 3D printer in my home & because I wanted to relearn software like Solidworks/Sketch-up, and not necessarily focus on tuning the hardware of the output machine.</p> <p>This printer works as intended, fits adorably on my desk next to my computer, is relatively quiet, and makes really really nice (but small) prints.</p> <p>I definitely foresee myself spending a little more time and money on a larger, home-assembled printer kit down the road, but for now this baby is perfect.</p>
| 22 reviews
More fun than I thought it could be. Had it printing the first print within 10 minutes of taking it out of the box. The only adjustments it needed was the Z contact offset. This was not too necessary as it printed fine without the adjustment, but dialing it in made the prints look that much better. Right away I added an on/off switch since the printers only way of turning on and off is to unplug it (dumb design). I also added some LED's inside the nozzle enclosure to light up the print bed. Overall I am very happy with my purchase and instantly ordered the extended and heated bed to upgrade; 4x4x5 is a bit too small and the upgrade gives you 4x8x5 for only $75 more.
| 22 reviews
This 3D printer works great! It came pre-assembled and printed beautifully right out of the box. I found that Hatch Box filament works the best at a temp of 210 degrees and at .01 layer thickness I was able to get great results. The print area is somewhat small but for what I needed it for it was fine. I highly recommend this printer to someone just getting started with 3D printing.
| 22 reviews
<p>It was really awesome the way each pice fit together. The printer feels extremely stable. I fully recommend this unassembled kit, it teach you a lot about 3D printing when you put together by your self</p>

Write a review

Your Name:

Your Review: Note: HTML Supported!

Rating: Bad           Good

3d printing latest news

View All News
Researchers Explore 3D Pr Date posted - 24/10/2016

Researchers Explore 3D Pr

The use of 3D printing technology is advancing day by day. The te...

Read More
Reebok to Bring 3D Printe Date posted - 22/10/2016

Reebok to Bring 3D Printe

Reebok has created a remarkable history in the world of the shoe ...

Read More
UAE’s First 3D Printed Un Date posted - 21/10/2016

UAE’s First 3D Printed Un

UAE has emerged as one of the world’s most significant incubators...

Read More
Designing Modular Furnitu Date posted - 20/10/2016

Designing Modular Furnitu

The Dutch Design Week, each year presents a good number of impressive products and projects. Thes...

Read More

Last viewed

Printrbot Play 3D Printer
22 reviews (22 reviews)
$499 USD $399 USD
This limited offer ends in:
3D Printers Online Store © 2013-2016 All Rights Reserved.