Sovol SV07 Klipper 3D Printer

Sovol SV07 Klipper 3D Printer

Main Features:

• Klipper Makes Print Speed up to 500mm/s: SV07 is equipped with 480x800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. Klipper firmware allows the high-speed printing of SV07 up to 500mm/s. We recommend you to choose 250mm/s for optimal results. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs.
• 300℃ High Temp Printing: All-metal hotend comes with a larger melt zone, which makes SV07 print at 300℃. An extra large fan at the rear of the extruder offers triple airflows to quickly cool prints and achieves good layering for better results. It makes the high speed and high temperature possible. No more PTFE replacements or firmware flashes needed to print with different materials easily, like ABS, Nylon, carbon Fiber, PC, PETG, Wood, etc. (Enclosure still required for printing above 260℃)
• Planetary Dual Gear Direct Drive: With Sovol's self-developed all Metal Direct Drive Extruder that comes with planetary dual gear set, SV07 offers a higher drive ratio and lighter motor for precise extrusion. We also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.
• 25-point Bed Leveling: SV07 uses 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. This precise and smart technology makes it possible to get a fantastic first layer. Note: Set initial layer height to 0.3mm when slicing will help you get optimal results.
• Double Sided Black PEI Plate: The flexible plate of SV07 is not only a magnetic print bed which offers excellent adhesion but also a durable part. You could remove prints easily without any tools. And its double sided design ensures that it will serve SV07 for longer time. If you have any adhension issue we recommend you to wipe the PEI surface with alcohol before the next printing.